A well-insulated home is not just more comfortable in winter. It reduces heat loss, stabilizes indoor temperatures, and helps prepare the property technically for the colder months. Especially in older homes in the Netherlands, heat often escapes from multiple places at once: windows, floors, roofs, facades, seams, and poorly fitted building components.
That is why autumn is an ideal time to plan insulation work. The weak spots in a home become noticeable, while work can often be scheduled more easily than in the middle of winter. For homeowners looking to improve their property this season, Bricknest is offering a limited-time discount on insulation services.
Limited autumn offer from Bricknest
This offer is intended for homeowners who want to make targeted improvements to their property before the cold sets in. It is not about isolated, rushed interventions, but rather insulation work that is technically assessed and tailored to the existing condition of the house.
The discount applies to larger projects. This allows insulation to be combined with necessary preparatory work, finishing, or other renovation elements required for a high-quality final result.
Starting at 10% discount on projects from €15,000
For projects starting at €15,000, you will receive a discount of at least 10% on insulation work. The exact discount depends on the project composition, the chosen work, the technical condition of the home, and the materials used.
Such a project could involve one major intervention, such as roof insulation or window replacement, or a combination of several insulation measures. Proper planning is essential for combined work, as the roof, floor, facade, windows, ventilation, and finishing can all technically affect one another.
The discount provides the most value when the work is carried out carefully. Poorly installed insulation can cause thermal bridges, condensation, or moisture problems. Therefore, material selection, substrate, ventilation, and detailing must be checked in advance.
The offer is valid only during the autumn period
This offer is temporary and valid only during the autumn period. It is important not to delay your request until winter has already begun. Work on roofs, facades, floors, or windows requires preparation, material selection, and a clear sequence of execution.
In autumn, problems such as drafts, cold floors, and heat loss often become apparent. At the same time, there is still room to organize work properly before cold weather, precipitation, or busy schedules make the process more difficult.
Starting on time allows you to improve your home this season. This makes the house more comfortable during the cold months and prevents necessary insulation measures from being postponed again.
Which insulation services are covered by the promotion?
The promotion can be applied to various types of insulation work. The right choice depends on the home: the year of construction, structure, moisture behavior, condition of window frames, crawl space, roof construction, and existing ventilation all determine which solution makes sense.
A good approach therefore begins with a technical assessment. Not every house needs the same measure, and not every insulation material is suitable for every surface.
Installation and replacement of windows
Windows and frames are often major sources of heat loss. Old glazing, gaps around the frame, or poor connections to the facade can cause drafts, condensation, and cold spots.
When replacing windows, we look at the type of glass, the condition of the frame, ventilation grilles, water drainage, and the connection around the reveals. Replacing only the glass is not always sufficient if the frame is warping, closing poorly, or not connecting properly to the facade.
Ventilation must also be taken into account. New windows reduce air leaks, but the home must still be able to ventilate healthily. Therefore, window replacement, gap sealing, and air supply are best assessed together.
Floor insulation
Floor insulation is particularly useful for cold ground floors, drafts from the crawl space, or heat loss through unheated areas. The execution depends heavily on the floor construction.
For wooden floors, factors such as joists, moisture, ventilation, and crawl space accessibility must be considered. For concrete floors, the subfloor, available height, and connection to existing floor finishes play a larger role.
The following points usually need to be checked beforehand:
- accessibility and moisture levels of the crawl space;
- type of floor construction and the condition of joists or concrete;
- presence of pipes under the floor;
- insulation sealing along edges and penetrations;
- maintaining sufficient ventilation under the floor.
After this assessment, it can be determined which insulation material is suitable and how the floor can be sustainably improved without causing moisture problems.
Roof insulation
Roof insulation often has a significant impact on a home's heat loss. Attics, pitched roofs, and older roof structures require particular attention if the upper floor feels cold or is being used as living space.
Roof insulation can be installed from the inside or the outside. For interior insulation, vapor barriers, airtightness, and sealing around beams are important. For exterior insulation, roofing, roof edges, drainage, and connections must be carefully detailed.
When an attic is later used as a bedroom, office, or additional living space, roof insulation must be combined with electrical work, ventilation, heating, and finishing. Otherwise, you may create a warmer room, but not a truly functional living area.
Facade and wall insulation
Facade and wall insulation can significantly improve indoor comfort, but it requires a careful assessment of the existing wall. Cavity wall insulation, interior insulation, and exterior facade insulation each have their own technical requirements.
In older homes, moisture behavior is particularly important. A facade must be able to dry, and an incorrectly chosen insulation system can cause condensation or mold. Therefore, one must look not only at insulation value but also at vapor control, ventilation, and connections to window frames.
When the exterior is altered, the streetscape, detailing, finish, and any regulations from the municipality or homeowners' association may also play a role.
Other insulation work
In addition to windows, floors, roofs, and facades, smaller insulation measures can also make a big difference. Consider draft proofing, pipe insulation, insulating utility rooms, improving cold bridges, or resolving drafts around doors.
These tasks may seem minor, but they can reduce daily comfort issues. Cold corners, poorly fitted baseboards, drafts along window frames, or uninsulated pipes can significantly affect how warm your home feels.
The best solution usually comes from assessing multiple weak spots together. This prevents improving one area while heat loss continues elsewhere.
Why it is wise to insulate your home this autumn
Autumn is a practical and technical ideal time for insulation. You can prepare your home before the coldest period sets in, while issues like drafts, cold floors, or heat loss are already clearly noticeable.
It is also beneficial for planning. Materials can be selected in good time, work can be scheduled, and you have more space to make decisions at your own pace.
Less heat loss
Insulation limits heat loss through building components that border the outside air, the ground, or unheated spaces. The roof, floor, facade, and windows together form the thermal envelope of your home.
When that envelope has weak spots, your heating system has to work harder to maintain the same indoor temperature. This can lead to cold zones, drafts, and uneven warmth throughout the house.
A technical insulation approach therefore focuses on the biggest points of loss. The goal is not to add random materials, but to make the home function better as a whole.
More comfort at home
Comfort depends on more than just the temperature on the thermostat. A room may seem warm, but still feel unpleasant if walls, windows, or floors are cold to the touch.
Good insulation increases the surface temperature of building components. This makes the room feel more comfortable and consistent, especially in seating areas, bedrooms, workspaces, and bathrooms.
Drafts, noise, and moisture issues can also improve when insulation is properly combined with sealing gaps and ventilation. It is this synergy that determines whether the result is noticeable on a daily basis.
Preparing your home for the cold season
Before winter arrives, it is wise to check your home's weak points. Not every problem requires a major renovation, but some areas should be addressed in time to limit heat loss and discomfort.
Before the cold period, these areas deserve particular attention:
- drafts around windows, doors, and joints;
- cold floors above crawl spaces or unheated areas;
- heat loss through the roof, facade, or attic;
- condensation, damp spots, or insufficient ventilation;
- outdated glazing or damaged seals;
- poorly fitting window frames, baseboards, or facade details.
By assessing these points in the autumn, homeowners can make more targeted decisions about which insulation work to prioritize.
How to get a discount starting at 10%
The discount starts with a clear application. We then review which work is required, whether the project meets the criteria, and how the work can be scheduled for this autumn.
It is important that the discount is linked to a technically well-prepared project. This ensures the benefit isn't just about the price, but also results in a more reliable final outcome.
Submit an application
The first step is to submit an application with basic information about your home. Please include the type of property, the year of construction, the desired work, and any known issues such as drafts, cold floors, damp, or condensation.
Photos of windows, floors, the roof, the facade, or cold spots can help with the initial assessment. While they don't replace a technical survey, they make the conversation more concrete.
After the application, we can determine which areas require further investigation and whether the project qualifies for the temporary offer.
Discuss your project with a Bricknest specialist
During the consultation, we look at what you want to achieve: less draft, warmer floors, better roof insulation, new windows, facade improvements, or preparation for further renovation. We then assess which measures make technical sense.
A specialist examines the existing structure, moisture, ventilation, material choices, accessibility, and the sequence of work. This is necessary to prevent insulation from leading to thermal bridges or moisture problems later on.
This clarifies which insulation measures are technically necessary and which ones primarily provide extra comfort.
Receive a detailed cost estimate
A detailed cost estimate shows which work is included, which materials are used, and what preparatory steps are required. This prevents ambiguity during execution.
The cost estimate may include the following items:
- insulation work per building component;
- material selection and finish level;
- labor, delivery, and preparation;
- protection, waste disposal, and accessibility;
- inspection points during execution;
- application of the discount within the scope of the project;
- any additional work outside the initial offer.
With such a breakdown, the owner has a better understanding of what the discount applies to and which components need to be assessed separately.
Start the work this autumn
Once approved, the work can be scheduled. The start date depends on availability, material selection, technical preparation, and the scope of the project.
When it comes to insulation, the sequence is important. Windows, roof, floor, and facade can influence one another. Finishing, ventilation, and any additional renovation work must also fit into the schedule.
By starting this autumn, the home can be noticeably improved before or during the cold season. This makes the investment immediately tangible in daily use.
Home insulation and renovation in the Netherlands with Bricknest
Home insulation is often inseparable from renovation. When windows are replaced, floors are opened up, or roofs are addressed, it is wise to also assess finishing, installations, connections, and ventilation.
A comprehensive approach helps to avoid double work. If pipes, floors, or walls have to be opened up again later, some of the earlier preparation is lost.
Personal project manager
A personal project manager ensures that the owner does not have to coordinate all the professionals, deliveries, and technical decisions themselves. This is especially important when multiple components are being carried out simultaneously.
The project manager monitors the sequence of work, discusses choices, and keeps track of planning, execution, and completion points. This keeps the process more manageable.
In insulation projects, this role prevents decisions from overlapping: first assessment, then material selection, followed by preparation, execution, and inspection.
Transparent cost estimate
A transparent cost estimate provides insight into the total amount and the scope of the work. The owner sees which components are included and which choices affect the total price.
This is important for insulation, as the same measure can vary from one home to another. A roof with easy access requires a different approach than a roof with old finishes, signs of moisture, or complex connections.
A clear cost breakdown also helps in understanding the discount. The owner then knows which insulation work is covered by the offer and which additional tasks are assessed separately.
Quality control of the work
Quality control is essential when it comes to insulation. Poorly installed insulation can lead to thermal bridges, moisture problems, or reduced effectiveness. That is why connections, seams, vapor barriers, and ventilation must be carefully inspected.
Inspection should not only take place at the end. Some components will later be hidden behind walls, floors, ceilings, or finishes. It must be clear that they have been executed correctly just before they are closed off.
Effective quality control therefore examines materials, workmanship, connections to existing structures, and integration with ventilation systems.
Complete renovation management
Complete management means that insulation, renovation, and finishing are all coordinated. This prevents work from conflicting or having to be redone later.
With a combined approach, for example, floor insulation, new flooring, electrical adjustments, and painting can be planned in one logical sequence. The same applies to roof insulation with attic finishing or window replacement with reveal repairs.
For the owner, this means fewer separate appointments, clearer accountability, and more control over the final result.
Take advantage of our autumn offer in time
The autumn offer is intended for homeowners who want to technically improve their property before the cold weather sets in. The sooner the request is submitted, the better the work, materials, and scheduling can be coordinated.
A well-insulated home starts with a proper assessment. Only then does it become clear which measures will have the most impact and how the discount can be applied to the project.
Submit a request for a free consultation
A free consultation helps clarify initial technical questions. Where is the house losing heat? Are the windows, floor, roof, or facade the biggest culprits? Is there an issue with drafts, moisture, or poor ventilation? And which tasks can still be scheduled for this autumn?
After this conversation, the owner can make a more informed decision about whether insulation is worthwhile now, which tasks should take priority, and how the discount can be applied.
Get advice and discover your discount
